Agri lime – An essential ingredient for soil productivity

bbl — Wed, 18 Aug 2021 15:06:49 +0000

Correcting soil pH is the first step to improving soil productivity and exploiting our competitive advantage of maximising the level of grazed grass in animal diets.

Trials have shown that by increasing soil pH from 5.5 to 6.3, increased grass production of at least 1.5t DM/ha/year can be achieved, which represents a 7:1 return on investment; €7 in additional grass yield for each €1 invested in lime.

Correcting soil pH allows for more efficient use of Nitrogen (N) fertilisers, meaning less N will be required to grow the same amount of grass. A regular application of lime releases up to 80kgs of N/ha/year and unlocks phosphorus (P) and potassium (K) from organic soil reserves, which reduces the need for applied fertiliser.

Regular liming will also be a key requirement where clover swards are being established as clover has shown to have a lower tolerance for pH when compared to ryegrass.

Now is the time to lime

Unless you have plans to take a 3rd cut of silage, now is a great opportunity to act on your soil samples and spread lime. August and September are particularly good months for spreading on grazing grounds while rotations extend and ground conditions remain good.

To reduce the risk of lime residues, apply lime to low grass covers and when rain is forecast. If the lime has been washed off the leaf by rain, animals may be let back in to graze again.
If applying lime to a grass reseed, apply after ploughing and incorporate into the seedbed to increase the availability of nutrients (NPK) and maximise germination and establishment.
There is no problem spreading CAN-based fertiliser and/or CAN- based compounds with lime. There is also no need to leave a gap between lime and protected urea as the protection on the urea reduces N losses as ammonia gas.
If the slurry is applied first, allow it to wash into the soil for 7-10 days, and then apply lime. If lime is applied first, wait three months to spread slurry.
If spreading urea before lime, leave 10 days between applications. If spreading lime first, avoid applying urea for 3 months.
Apply a maximum of 7.5t/ha (3.0t/ac) in a single application. Where more lime is recommended, apply the balance after two years.

Unless you have plans to take a 3rd cut of silage, now is a great opportunity to act on your soil samples and spread lime.

Lime Type

No two farms are the same, therefore it is essential to soil test every 3-5 years to identify the rate of lime required for your individual farm. Soil testing regularly and liming as per soil test is the best approach to maintaining soil pH and achieving long-term benefits.

It is also important to select the correct type of lime. Both calcium lime and magnesium lime are excellent at correcting soil acidity. Calcium ground limestone is the most common form of lime spread. It is readily available in most parts of the country and is fast-acting and gives rapid pH adjustment.

In the Southeast, most soils are predominately high in magnesium and deficient in calcium. Where soil magnesium is low (<50ppm), applying magnesium limestone to correct both soil pH and Mg levels is most efficient. If your soil is deficient in calcium, this impacts on grassland productivity, and ultimately, animal performance.

Applying calcium in the form of calcium carbonate will raise the level of calcium in the soil, which in turn will help condition the soil, improve soil structure and drainage, and allow for better root development and nutrient uptake.

Lime Quality

The importance of a good-quality lime product cannot be underestimated. Minimum standards for ground limestone include:

The product must have a Total Neutralising Value (TNV) greater than 90 percent.
100% must pass through a 3.35 mm sieve (very coarse limestone is less effective at increasing pH due to lower reactivity and needs additional time to break down and dissolve).
At least 35% must pass through a 0.15 mm sieve (finely ground).
The moisture content must be less than 3.0%.

Here at Bennettsbridge Limestone, we undergo independent twice-yearly testing for TNV, moisture value, and grading.

Hi-Calcium Agri Lime

Bennettsbridge Limestone is a member of GROLIME, Ireland’s only agricultural lime quality assurance scheme. We undergo independent twice-yearly testing for TNV, moisture value and grading.

Our Hi- Calcium lime has a consistent Total Neutralising Value (TNV) of 98%, which is a measure of how effective a lime is at neutralising the acidity in the soil. Using lime with a high TNV will result in a large cost saving for the user as less material will be needed to adjust the soil pH.

At Bennettsbridge Limestone, we also place a large emphasis on lime fineness, consistently manufacturing lime with 33% more powder than the Department of Agriculture specification.

Need help and advice?

For further liming advice or to learn more about our Hi-Calcium Agri Lime.

Like us on Facebook

The post Agri lime – An essential ingredient for soil productivity appeared first on Bennettsbridge Limestone.

Applying lime is a necessity, not a luxury

bbl — Fri, 21 Aug 2020 11:51:25 +0000

Although there has never been as much about the benefits of agri lime, reports of up to 80% of Irish soils are still regarded as suboptimal pH. Lime is a forgotten fertiliser, and too often, liming plans can fall off the priority list for many farmers.

The primary purpose of lime application is to correct soil acidity levels, as low soil pH is usually one of the main causes of underperforming fields. Trials have shown that by increasing soil pH from 5.5 to 6.3, increased grass production of at least 1.5t DM/ha/year can be achieved, which represents a 7:1 return on investment; €7 in additional grass yield for each €1 invested in lime.

Apart from improvements in grass yield, increasing soil pH is also a win-win solution for farmers in terms of reducing N₂O emissions. For example, recent research from Teagasc Johnstown Castle has found that when comparing limed plots versus un-limed plots under the same management and fertiliser regime, the limed plots resulted in a significant reduction of N₂O emissions.

When to lime?

For many farmers, one of the biggest reasons for not spreading lime regularly is the lack of planning. Although many farmers believe that you can only apply lime at specific times of the year, it can in fact be spread all year round. For example, unless you have plans to take a 3^rd cut of silage, now is a great opportunity to act on your soil samples and spread lime. August and September are particularly good months for spreading on grazing grounds while rotations extend and ground conditions remain good.

Which lime to use?

Both Calcium Lime and Magnesium Lime are excellent at correcting soil acidity. Calcium ground limestone is the most common form of lime spread. It is readily available in most parts of the country and is fast acting and gives rapid pH adjustment.

In the South East, most soils are predominately high in Magnesium and deficient in Calcium. If your soil is deficient in Calcium, this impacts on grassland productivity, and ultimately, animal performance. Applying Calcium in the form of Calcium Carbonate will raise the level of Calcium in the soil, which in turn will help condition the soil, improve soil structure and drainage, and allow for better root development and nutrient uptake.

WATCH: What are the benefits of our Hi-Calcium Agri Lime?

Our Hi-Calcium Agri Lime comes from a high purity calcium quarry and is ground in a modern limestone powders plant on site. Listen to the video below to discover the top 3 benefits of our agri lime and why they matter when it comes to achieving a successful liming programme:

Need help or advice?

Bennettsbridge Limestone is a member of GROLIME, Ireland’s only agricultural lime quality assurance scheme. For further liming advice or to learn more about our Hi-Calcium Agri Lime, click here

Like us on Facebook

Follow us on Twitter